Fits 1971-1980 International Scout II, Terra and Traveler.
Vintage Air's 5th Generation SureFit system brings modern heat and A/C to your Scout and keeps the stock look. It mounts behind the factory dash and uses all-electronic, microprocessor controls, so there are no cables or vacuum lines to adjust or leak.
The A/C and heater coils are separate, high-density aluminum units, and a blend door mixes the air to set vent temperature quickly. You get variable fan speed and can send air to the dash, floor, defrost, or any mix of them.
Compressor brackets are different for each engine, so choose your engine when you order.
What's included
The complete kit has everything you need behind the dash and under the hood:
Evaporator unit and 3-knob control panel
A/C compressor and engine mounting brackets
Condenser with mounting brackets
Preformed refrigerant lines
Receiver drier
Fittings and installation hardware
Installation instructions
Features
Gen 5 design built for faster cool-down
Electronic controls with better diagnostics and built-in fail-safes
Rubber well-nut mounts that cut noise and vibration
Separate high-capacity A/C and heater coils
Blend air door for quick, precise temperature changes
OEM-style block expansion valve
Injection-molded case and air doors with built-in rubber seals
Removable access covers for coil service
Powder-coated steel mounting brackets
Quiet, high-output blower
New 3-knob control panel with aluminum bezel
Flat steel firewall cover for a clean install
Replacement ABS glove box made to clear the new system
Shipping
Ships direct from Vintage Air by ground only, separately from the rest of your order.
Installation in Orange County
Want it installed? American Motorcars installs Vintage Air A/C in International Scouts at our Anaheim, CA shop. See our Scout A/C installation page or contact us for an estimate.
Scout II A/C FAQ
Will this AC kit fit my Scout?
It is made for the 1971-1980 International Scout II, including the Terra and Traveler. It is not for the Scout 80 or 800.
Does it work with an LS swap?
Yes. Pick the GM LS 5.3 or 6.0 option, or the GM 6.2 option, from the Engine menu, and the compressor brackets are matched to your engine.
Is this the complete A/C system?
Yes. It includes the evaporator and heater unit, controls, compressor, condenser, refrigerant lines, receiver drier and hardware.
Do I have to cut my dash?
The SureFit unit mounts behind the factory dash and keeps the stock look. The kit includes a firewall cover and a replacement glove box made to clear the new system.
How does it ship?
It ships by ground direct from Vintage Air, separately from the rest of your order.
Install Instructions and Video
See Vintage Air's Scout II Gen 5 SureFit installation instructions (PDF) and watch the Vintage Air Scout II install video. See our Scout II A/C installation page for more.
Fits 1971-1980 International Scout II, Terra and Traveler.
Vintage Air's 5th Generation SureFit system brings modern heat and A/C to your Scout and keeps the stock look. It mounts behind the factory dash and uses all-electronic, microprocessor controls, so there are no cables or vacuum lines to adjust or leak.
The A/C and heater coils are separate, high-density aluminum units, and a blend door mixes the air to set vent temperature quickly. You get variable fan speed and can send air to the dash, floor, defrost, or any mix of them.
Compressor brackets are different for each engine, so choose your engine when you order.
What's included
The complete kit has everything you need behind the dash and under the hood:
Evaporator unit and 3-knob control panel
A/C compressor and engine mounting brackets
Condenser with mounting brackets
Preformed refrigerant lines
Receiver drier
Fittings and installation hardware
Installation instructions
Features
Gen 5 design built for faster cool-down
Electronic controls with better diagnostics and built-in fail-safes
Rubber well-nut mounts that cut noise and vibration
Separate high-capacity A/C and heater coils
Blend air door for quick, precise temperature changes
OEM-style block expansion valve
Injection-molded case and air doors with built-in rubber seals
Removable access covers for coil service
Powder-coated steel mounting brackets
Quiet, high-output blower
New 3-knob control panel with aluminum bezel
Flat steel firewall cover for a clean install
Replacement ABS glove box made to clear the new system
Shipping
Ships direct from Vintage Air by ground only, separately from the rest of your order.
Installation in Orange County
Want it installed? American Motorcars installs Vintage Air A/C in International Scouts at our Anaheim, CA shop. See our Scout A/C installation page or contact us for an estimate.
Scout II A/C FAQ
Will this AC kit fit my Scout?
It is made for the 1971-1980 International Scout II, including the Terra and Traveler. It is not for the Scout 80 or 800.
Does it work with an LS swap?
Yes. Pick the GM LS 5.3 or 6.0 option, or the GM 6.2 option, from the Engine menu, and the compressor brackets are matched to your engine.
Is this the complete A/C system?
Yes. It includes the evaporator and heater unit, controls, compressor, condenser, refrigerant lines, receiver drier and hardware.
Do I have to cut my dash?
The SureFit unit mounts behind the factory dash and keeps the stock look. The kit includes a firewall cover and a replacement glove box made to clear the new system.
How does it ship?
It ships by ground direct from Vintage Air, separately from the rest of your order.
Install Instructions and Video
See Vintage Air's Scout II Gen 5 SureFit installation instructions (PDF) and watch the Vintage Air Scout II install video. See our Scout II A/C installation page for more.
Image 1 of 12
Image 2 of 12
Image 3 of 12
Image 4 of 12
Image 5 of 12
Image 6 of 12
Image 7 of 12
Image 8 of 12
Image 9 of 12
Image 10 of 12
Image 11 of 12
Image 12 of 12