1971-1980 International Scout II Vintage Air Gen 5 SureFit Evaporator Kit #751710

$1,458.00

Fits 1971-1980 International Scout II, Terra and Traveler. Vintage Air part #751710.

This is the behind-the-dash half of Vintage Air's 5th Generation SureFit system. It gives your Scout modern heat, A/C and defrost while keeping the stock look. The unit mounts behind the factory dash and uses all-electronic, microprocessor controls, so there are no cables or vacuum lines to adjust or leak.

The A/C and heater coils are separate, high-density aluminum units, and a blend door mixes the air to set vent temperature quickly. You get variable fan speed and can send air to the dash, floor, defrost, or any mix of them.

Already have your compressor, condenser and lines, or building a custom setup? This evaporator kit is the right choice. Need everything? See our Scout II Vintage Air Gen 5 complete A/C and heat kit.

What's included

  • Gen 5 evaporator and heater unit

  • Mounting brackets

  • Louvers (where required)

  • Duct hose

  • Wiring harness

  • New 3-knob control panel with aluminum bezel

  • Hardware and installation instructions

Not included: compressor, engine brackets, condenser, drier and refrigerant hoses. These are sold separately or come in the complete kit.

Features

  • Gen 5 design built for faster cool-down

  • Electronic controls with better diagnostics and built-in fail-safes

  • Rubber well-nut mounts that cut noise and vibration

  • Separate high-capacity A/C and heater coils

  • Blend air door for quick, precise temperature changes

  • OEM-style block expansion valve

  • Injection-molded case and air doors with built-in rubber seals

  • Removable access covers for coil service

  • Powder-coated steel mounting brackets

  • Quiet, high-output blower

  • Flat steel firewall cover for a clean install

  • Replacement ABS glove box made to clear the new system

Shipping

Ships direct from Vintage Air by ground only, separately from the rest of your order. Special-order and drop-ship items are final sale. See our Shipping and Returns policy.

Installation in Orange County

Want it installed? American Motorcars installs Vintage Air A/C in International Scouts at our Anaheim, CA shop. See our Scout A/C installation page or contact us for an estimate.

Scout II Evaporator Kit FAQ

Will this fit my Scout?

It is made for the 1971-1980 International Scout II, including the Terra and Traveler. It is not for the Scout 80 or 800.

What is the difference between the evaporator kit and the complete kit?

The evaporator kit is everything behind the dash: the A/C and heater unit, controls, ducts and wiring. The complete kit adds the under-hood parts: compressor, engine brackets, condenser, drier and refrigerant lines.

Will it work with an LS swap or other engine?

Yes. The evaporator kit mounts inside the cab, so it does not depend on your engine. Pick compressor brackets and lines to match your engine.

Do I have to cut my dash?

No. The SureFit unit mounts behind the factory dash and keeps the stock look. It includes a firewall cover and a replacement glove box made to clear the new system.

Install Instructions and Video

See Vintage Air's Scout II Gen 5 SureFit evaporator kit installation instructions (PDF) and watch the Vintage Air Scout II install video.

Fits 1971-1980 International Scout II, Terra and Traveler. Vintage Air part #751710.

This is the behind-the-dash half of Vintage Air's 5th Generation SureFit system. It gives your Scout modern heat, A/C and defrost while keeping the stock look. The unit mounts behind the factory dash and uses all-electronic, microprocessor controls, so there are no cables or vacuum lines to adjust or leak.

The A/C and heater coils are separate, high-density aluminum units, and a blend door mixes the air to set vent temperature quickly. You get variable fan speed and can send air to the dash, floor, defrost, or any mix of them.

Already have your compressor, condenser and lines, or building a custom setup? This evaporator kit is the right choice. Need everything? See our Scout II Vintage Air Gen 5 complete A/C and heat kit.

What's included

  • Gen 5 evaporator and heater unit

  • Mounting brackets

  • Louvers (where required)

  • Duct hose

  • Wiring harness

  • New 3-knob control panel with aluminum bezel

  • Hardware and installation instructions

Not included: compressor, engine brackets, condenser, drier and refrigerant hoses. These are sold separately or come in the complete kit.

Features

  • Gen 5 design built for faster cool-down

  • Electronic controls with better diagnostics and built-in fail-safes

  • Rubber well-nut mounts that cut noise and vibration

  • Separate high-capacity A/C and heater coils

  • Blend air door for quick, precise temperature changes

  • OEM-style block expansion valve

  • Injection-molded case and air doors with built-in rubber seals

  • Removable access covers for coil service

  • Powder-coated steel mounting brackets

  • Quiet, high-output blower

  • Flat steel firewall cover for a clean install

  • Replacement ABS glove box made to clear the new system

Shipping

Ships direct from Vintage Air by ground only, separately from the rest of your order. Special-order and drop-ship items are final sale. See our Shipping and Returns policy.

Installation in Orange County

Want it installed? American Motorcars installs Vintage Air A/C in International Scouts at our Anaheim, CA shop. See our Scout A/C installation page or contact us for an estimate.

Scout II Evaporator Kit FAQ

Will this fit my Scout?

It is made for the 1971-1980 International Scout II, including the Terra and Traveler. It is not for the Scout 80 or 800.

What is the difference between the evaporator kit and the complete kit?

The evaporator kit is everything behind the dash: the A/C and heater unit, controls, ducts and wiring. The complete kit adds the under-hood parts: compressor, engine brackets, condenser, drier and refrigerant lines.

Will it work with an LS swap or other engine?

Yes. The evaporator kit mounts inside the cab, so it does not depend on your engine. Pick compressor brackets and lines to match your engine.

Do I have to cut my dash?

No. The SureFit unit mounts behind the factory dash and keeps the stock look. It includes a firewall cover and a replacement glove box made to clear the new system.

Install Instructions and Video

See Vintage Air's Scout II Gen 5 SureFit evaporator kit installation instructions (PDF) and watch the Vintage Air Scout II install video.